We've had quite a few people ask questions about whether rolling Konecto Vinyl Flooring is necessary. Listed below is the Manufacturer's view on this question.

From: Check List for Konecto Installations (by Metroflor, the manufacturer of Konecto)

Has the material been rolled?
When each plank/tile is installed a hand roller with direct pressure to the seams must be used! After completion a 100 lbs roller should be used across all seams. Before starting installation two planks should be put together then rolled and pulled apart. A bond should be observed throughout the whole strip. Adhesive legs and/or transfer from one side to the other should be seen. This will confirm the material is acclimated and the temperature of material is correct for installation.
Not rolling will void Warranty!

To View Whole Check List for Konecto Installations CLICK HERE

Also the same info can be found on Konecto Installation Manual CLICK HERE TO VIEW

Flooring Market offers the hand roller necessary to install your Konecto Vinyl Floor properly.

Our Konecto Professional Grade Seam Roller gives 30-40 PSI for positive bonding. The 1-1/2"diameter x 3" wide rubber roller has no axle projection on one end, forscratchless flush work. The handle is 1/2" diameter sturdy lightweightaluminum alloy, and has two soft vinyl hand grips. Overall length is12-1/2".


Questions or want to place an order please call 1-877-357-9663 or visit www.flooringmarket.com.