Cleaning and Maintaining Konecto Floors in a Commercial Environment
MAINTENANCE FOR KONECTO COMMERCIAL FLOORS
• The type frequency of traffic on your KONECTO floor will determine the frequency of maintenance needed.
• The type of floor, and even the color, will have some bearing on how much care may be necessary.
• Regular adherence to an effective maintenance program should include:
- thorough dirt and grit regulation and prompt removal of spills and stains protection of the floor surface
The most effective part of any floor maintenance program is the simplest: sweep, dust mop or vacuum KONECTO flooring DAILY, or more frequently if needed.
Routine Commercial Maintenance:
1. KONECTO solid vinyl plank has excellent durability and a history of performing
well in heavy commercial installations as long as a sound maintenance program is
followed. Light daily sweeping, dust mopping or vacuuming will prevent dirt and grit
particles from being ground into the surface of the tile. Non-rubber, walk off mats
should be used to control the amount of dirt and grit reaching the floor. The mats
should be as wide as the doorway and thick enough to trap dirt. Frequent light
mopping will prevent the floor from becoming heavily soiled and will remove most
spills and stains. The amount and type of traffic will dictate the frequency of
washing. Wash the floor by damp mopping or use an Auto-Scrubbing machine with
Konecto Cleaner following instructions on the bottle.
2. If the floor receives hard use and becomes extremely dirty, as in heavily used
commercial installations, Floor scrubbing with a 175-300 RPM floor Buffer will be
necessary with a red scrubbing-type (polyester or nylon) pad. Mop the floor with
Konecto Cleaner and work the solution over the floor using the buffer and the
scrubbing pad. After this has been done, remove the dirty residue by damp
mopping with a clean bucket of Konecto Cleaner following instructions on bottle.
Let floor dry, you will then see a light film residue, take low speed buffer and a
White polishing pad and buff until the film is removed. Please Note: Do not use a
buffer that is more than 300 RPM under any circumstances.
Questions or want to place an order please call 1-877-357-9663 or visit www.flooringmarket.com.
• The type frequency of traffic on your KONECTO floor will determine the frequency of maintenance needed.
• The type of floor, and even the color, will have some bearing on how much care may be necessary.
• Regular adherence to an effective maintenance program should include:
- thorough dirt and grit regulation and prompt removal of spills and stains protection of the floor surface
The most effective part of any floor maintenance program is the simplest: sweep, dust mop or vacuum KONECTO flooring DAILY, or more frequently if needed.
Routine Commercial Maintenance:
1. KONECTO solid vinyl plank has excellent durability and a history of performing
well in heavy commercial installations as long as a sound maintenance program is
followed. Light daily sweeping, dust mopping or vacuuming will prevent dirt and grit
particles from being ground into the surface of the tile. Non-rubber, walk off mats
should be used to control the amount of dirt and grit reaching the floor. The mats
should be as wide as the doorway and thick enough to trap dirt. Frequent light
mopping will prevent the floor from becoming heavily soiled and will remove most
spills and stains. The amount and type of traffic will dictate the frequency of
washing. Wash the floor by damp mopping or use an Auto-Scrubbing machine with
Konecto Cleaner following instructions on the bottle.
2. If the floor receives hard use and becomes extremely dirty, as in heavily used
commercial installations, Floor scrubbing with a 175-300 RPM floor Buffer will be
necessary with a red scrubbing-type (polyester or nylon) pad. Mop the floor with
Konecto Cleaner and work the solution over the floor using the buffer and the
scrubbing pad. After this has been done, remove the dirty residue by damp
mopping with a clean bucket of Konecto Cleaner following instructions on bottle.
Let floor dry, you will then see a light film residue, take low speed buffer and a
White polishing pad and buff until the film is removed. Please Note: Do not use a
buffer that is more than 300 RPM under any circumstances.
Questions or want to place an order please call 1-877-357-9663 or visit www.flooringmarket.com.
Posted by FlooringMarket Floor Retailer at 12/18/2009 10:09 AM 
Categories: Maintenance, Vinyl Flooring, Konecto Vinyl Flooring
Categories: Maintenance, Vinyl Flooring, Konecto Vinyl Flooring
Comments