Konecto  represents the newest generation of high quality resilient wood and tile look flooring.  With an innovative lock-connect technology, Konecto floors are easy to install, and equally simple to replace if ever necessary.  Konecto  ... the easy path to a beautiful new floor.  Please read below for helpful Konecto  install tips!

1. Tools needed:
• Straight Edge
• Square
• Utility Knife
• Linoleum Hand Roller
• 100 pound roller

2.  Sub Floor Prep:

• Must be Sound, Solid, and have little Flexibility
• Water not an issue…Konecto is water proof Fill large cracks (1/4” or larger) with high quality cementitous patch
• Do not go over carpet or soft cushioned Vinyl.

3. Installation:

• Start in left corner of longest wall
• Position 1st plank with under lip facing out.
• Measure wall to make sure that last plank is longer than 12 inches
• Stagger first three courses so that end joints do not line up.
• Always place cut end of joint next to wall.
• Never place plank with cut end in the middle of a course.
• Use hand roller to reinforce bond of joints as you join the planks
• Finish job with 100 pound roller

4. Tips:

• If end joints appear to be curled when removed from carton simply reverse roll them and place onto lower lip of adjoining plank and roll with hand roller
• If some Konecto adhesive seems less tacky, warm with heat gun and install.
• Job site must be at least 65 degrees or warmer.
• Material should never sit in vehicle over night during the winter time without properly acclimating material before install, preferably 48 hours.

  For information and pricing on Konecto vinyl flooring please visit www.FlooringMarket.com and call 1-877-357-9663 to speak to a sales representative today!